How to Hang Frames with Sawtooth Swivel Hangers

At Frame Amo, our smaller Signature Series solid wood frames are built with durability and ease of use in mind. To make hanging simple, these frames come with sawtooth swivel hangers pre-installed on the backing boards, each rated to hold up to 10 lbs.

This guide will walk you step-by-step through hanging your frame securely in either portrait (vertical) or landscape (horizontal) orientation.

Why Sawtooth Swivel Hangers?

Flexible orientation: The swivel design allows you to rotate the hanger for vertical or horizontal display.
Quick installation: Only requires a single nail or hook for most frames under 10 lbs¹.
Low-profile: Keeps the frame flush against the wall for a clean, professional look.

Tools You’ll Need

Pencil
Hammer or screwdriver
Small picture hanging nail, hook, or adhesive wall hanger (rated for 10+ lbs)
Level

Step 1: Choose Orientation

Decide if you’ll display the frame vertically or horizontally. Rotate the sawtooth swivel hanger so it aligns with the top edge of the backing board.

Step 2: Mark Placement

Hold the frame up against the wall at the desired height.
Lightly mark the top edge with a pencil.
Use a level to ensure your mark is straight.

Pro tip: A common rule of thumb is to hang art so the center is about 57–60 inches from the floor².

Step 3: Install Wall Hardware

Drywall: Use a small picture hook or adhesive hanger.
Stud or wood: A simple nail will work.

Place the nail or hook at your pencil mark, angled slightly upward for extra stability³.

Step 4: Hang and Adjust

Hook the sawtooth hanger over your nail or hook.
Step back and check alignment.
If it’s uneven, shift the hanger slightly along the sawtooth teeth until the frame sits level.

Safety Tips

Only use sawtooth swivel hangers for frames 10 lbs or less.
For larger or heavier frames, see our guide on using D-rings for secure installation⁴.